Original engineer had told the customer the Travel Power unit needed to be sent away for repair when actually there was no belt fitted! On this version of cocooned Beta 43 there is an idler pulley mounted on a swinging bracket which acts as the adjusting mechanism and it can be a pain. The idler pulleys bearings had worn into the steel causing the pulley to twist and damage the belt. Rather than replace the pulley we made up a different type of adjusting mechanism.
Heavy and agricultural Idler pulleys are frequently fitted to engines with Travel Power such as Beta 1903 and most Barrus and Nanni. It’s normally best to remove the pulley and fit a freewheeling pulley to the Travel Power which will increase the grip the belt can generate. If an idler pulley is also used to tension the belt then an adjusting arm like this can sometimes be used instead.
On this engine it wasn’t possible to fit the freewheeling pulley as alternator is mounted backwards and runs CCW.